天津市 金橋焊材集團有限公司
焊條,焊絲,焊劑,新手機號,15822087602
產品
| 產品型號︰ | YD888焊絲 |
|---|---|
| 產品規格︰ | 1.2-1.6 |
| 產品品牌︰ | 可選 |
| 產品單價︰ | 35.1/kg |
| 供貨總量︰ | 1000 |
| 最小訂量︰ | 15 |
| 發布時間︰ | 2017-05-29 20:41 |
| 有效期至︰ | 2020-08-22 |
詳情描述
企業介紹
立即咨詢
牌號 Trade Name | 直徑 Diameter | HRC （國家標準台式硬度計） | 特點及主要用途 characteristics and application |
HB-YD114(Q) | 1.6 | 50-55 (受強烈沖擊後 After high impact) | 高錳鋼堆焊焊絲，受強烈沖擊後，表面具有加工硬度的特點。 High-manganese steel hardfacing flux-cored wires, ~and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD115(Q) | 1.6 | 50-55 (受強烈沖擊後Afterhigh impact ) | 用于受嚴重沖擊高錳鋼堆焊，加工硬化效果顯著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD165(Q) | 1.6 | 60-65 | 高硬度耐磨焊絲，適用于磨粒磨損表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD172(Q) | 1.6 | ≧40 | 用于堆焊齒輪、挖泥斗、礦山機械等磨損件 Applied to repair surface of high impact wear parts, such as gear aud bucket ~and mining machinery. |
HB-YD207(Q) | 1.6 | ≧50 | 用于堆焊推土機刀片，螺旋槳等磨損零件 Applied to repair surface of high wear parts, such as bulldozer blade ~and propeller. |
HB-YD212(Q) | 1.2/1.6 | ≧50 | 用于堆焊各種受磨損的機件表面，如齒輪、挖斗、礦山機械 Applied to repair surface of wear parts, such as gear mud bucket ~and mining machinery. |
HB-YD256(Q) | 1.6 | HB≧170 | 高錳鋼堆焊，適用于破碎機等受沖擊磨損部位的堆焊 High-manganese steel hardfacing flux-cored Wires, it is applied to repair surface of high impact wear parts, such as Crusher. |
HB-YD258(Q) | 1.6 | 55-60 | 用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD265(Q) | 1.6 | 60-65 | 高硬度耐磨焊絲，適用于磨粒磨損表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD322(Q) | 1.6 | ≧55 | 用于堆焊各種沖模及切削刃具，兼用于修復要求耐磨損性能較高之機械零件 Applied to repair surface of high wear resistance parts, such as die ~and cutting cutlery. |
HB-YD327A(Q) | 1.6 | ≧55 | 專門用于模具堆焊，耐磨性能高于D322 Used to mould surfacing, wear resistance is better than D322. |
HB-YD337(Q) | 1.6 | ≧48 | 用于鑄鋼或鍛鋼上堆焊鍛模 Applied to repair forging die at cast steel or forging steel. |
HB-YD397(Q) | 1.6 | ≧40 | 用于堆焊鑄鋼或鍛鋼做坯體的熱鍛模或堆焊高強度耐磨件 Applied to repair hot forging die at cast steel or forging steel, ~or high strength wear surfacing. |
HB-YD405A(Q) | 1.6 | 50-59 | 用于熱軋輥開坯輥堆焊 Applied to repair hot-rolling blooming rollor. |
HB-YD430A(Q) | 1.6 | 20-35 | 打底層堆焊焊絲 A backing hardfacing flux-cored Wires |
HB-YD488A(Q) | 1.6 | 45-50 | 用于軋輥堆焊 Applied to repair rollor |
HB-YD507Mo(Q) | 1.6 | 35-45 | 用于510℃以下中高壓閥門堆焊 Applied to valve which operating temperature is less than 510℃. |
HB-YD518(Q) | 1.6 | 40-50 | 用于連鑄輥堆焊 Applied to repair continuous caster roller |
HB-YD688(Q) | 1.6 | 50-60 | 用于磨煤輥打底焊(韌性好，可以多層堆焊) Used to coal roller backing welding. |
HB-YD788(Q) | 1.6 | 55-62 | 硬度高，可以多層堆焊。 High hardness and multi-layer welding |
HB-YD888(Q) | 1.2, 1.6 | 60-65 | 硬度高，堆焊層厚度不超過6mm。 High hardness, but the thickness of surfacing layer is less than 6mm. |
HB-YD888Ni(Q) | 1.2 | 58-65 | 高鉻合金焊絲，用于耐磨表面堆焊 Applied to repair surface of wear parts |